Knowledge Base

search
Search
Categories
Dashboard

Printpix – A photo booth printing solution

Printpix is one of the most reliable printing solutions for Touchpix. Check the full list of compatible printers.

How to Connect Printpix

The most stable option is a fully wired setup. Choose the method that best suits your venue. Wireless setups are available but can be less stable in busy environments with high network traffic.

Connection Methods Comparison

Method Device → Printpix Stability Best For Recommended
1. Direct Wired Ethernet Very High Maximum stability ★★★★★
2. Wired + Router Ethernet via Router High Best internet speed ★★★★
3. Mixed Ethernet + Router WiFi High Good range + speed ★★★★
4. Full Wireless + Router WiFi via Router Medium Convenience ★★★
5. Direct Wireless (No Router) Direct WiFi Low * Very simple setups ★★

* This method requires extra care. When connecting directly via WiFi to Printpix, most iOS and Android devices tend to disconnect automatically from networks without internet access and switch to mobile data or another available WiFi. To maintain the connection, you must manually configure the device to stay connected to the network even without internet.

Common Requirements

  • Compatible printer with USB cable
  • Printpix box + power adapter
  • iPhone/iPad or Android device
  • Ethernet cable + USB-C adapter (for wired methods)
  • USB WiFi antenna (for wireless methods)

Method 1: Fully Wired Directly to Printpix (Recommended)

Printer ←USB→ Printpix ←Ethernet→ Device

  1. Connect the printer to the Printpix box using the printer’s USB cable.
  2. Connect an Ethernet-to-USB-C adapter to your device, then connect Printpix to the adapter with an Ethernet cable.
  3. Power on the Printpix box with the supplied adapter.
  4. Open the Touchpix app → tap the menu icon (top left) → go to Printing → select Printpix.
  5. Tap Connection Handling. Try Auto first, or select Manual IP, tap the three dots and choose Fill with Printpix wired IP. Then tap Connect.
  6. Select your printer under Available Printers.
  7. Recommended: Enable Automatic paper selection for automatic 4×6" or 6×4" prints (it will automatically cut strip templates into two 2×6" photos) and others.
  8. Add margins if desired.
  9. Start your photo sessions and enjoy almost instant printing!

Method 2: Fully Wired with Router

Printer ←USB→ Printpix ←Ethernet→ Router ←Ethernet→ Device

  1. Connect the printer to the Printpix box using the printer’s USB cable.
  2. Connect Printpix to the router using an Ethernet cable.
  3. Power on the Printpix box with the supplied adapter.
  4. Connect your device to the router’s WiFi network.
  5. Open a browser and go to 192.168.12.1:3000. Copy the IP shown aside 'Main Options'.
  6. Switch your device to the Ethernet connection (using the USB-C adapter connected to the router).
  7. Open the Touchpix app → menu → Printing → Printpix.
  8. Tap Connection Handling → select Manual IP, paste the copied IP and tap Connect.
  9. Select your printer under Available Printers.
  10. Recommended: Enable Automatic paper selection for automatic 4×6" or 6×4" prints (it will automatically cut strip templates into two 2×6" photos) and others.
  11. Add margins if desired.
  12. Start your photo sessions and enjoy fast printing!

Method 3: Mixed (Printpix Wired + Device on WiFi)

Printer ←USB→ Printpix ←Ethernet→ Router ←WiFi→ Device

  1. Connect the printer to the Printpix box using the printer’s USB cable.
  2. Connect Printpix to the router using an Ethernet cable.
  3. Power on the Printpix box.
  4. Connect your device to the router’s WiFi network.
  5. Open a browser and go to 192.168.12.1:3000. Copy the IP shown aside 'Main Options'.
  6. Open the Touchpix app → menu → Printing → Printpix.
  7. Tap Connection Handling → select Manual IP, paste the copied IP and tap Connect.
  8. Select your printer under Available Printers.
  9. Recommended: Enable Automatic paper selection for automatic 4×6" or 6×4" prints (it will automatically cut strip templates into two 2×6" photos) and others.
  10. Add margins if desired.
  11. Start your photo sessions and enjoy printing!

Method 4: Full Wireless with Router

Printer ←USB→ Printpix ←WiFi→ Router ←WiFi→ Device

  1. Connect the printer to the Printpix box using the printer’s USB cable.
  2. Insert the USB WiFi antenna into one of the black USB ports on the Printpix.
  3. Power on the Printpix box.
  4. Connect your device to the ‘tp-printserver’ WiFi (password is written on the box).
  5. Open a browser and go to 192.168.12.1:3000.
  6. Scroll down to Wireless - Network and set it to wlan1. Find your router’s WiFi and connect to it. Now your Printpix will connect to the router.
  7. Wait until an IP appears next to 'Main Options' below the 'Printpix Server' title.
  8. Open the Touchpix app → menu → Printing → Printpix.
  9. Tap Connection Handling → select Manual IP, paste the IP and tap Connect.
  10. Select your printer under Available Printers.
  11. Recommended: Enable Automatic paper selection for automatic 4×6" or 6×4" prints (it will automatically cut strip templates into two 2×6" photos) and others.
  12. Add margins if desired.
  13. Start your photo sessions and enjoy printing!

Method 5: Direct Wireless to Printpix (No Router)

Printer ←USB→ Printpix ←WiFi→ Device

  1. Connect the printer to the Printpix box using the printer’s USB cable.
  2. Insert the USB WiFi antenna into one of the black USB ports on the Printpix.
  3. Power on the Printpix box.
  4. Connect your device to the ‘tp-printserver’ WiFi network (password is written on the box).
  5. Open a browser and go to 192.168.12.1:3000. Copy the IP shown aside 'Main Options'.
  6. Open the Touchpix app → menu → Printing → Printpix.
  7. Tap Connection Handling. Try Auto first, or select Manual IP and enter the IP manually. Then tap Connect.
  8. Select your printer under Available Printers.
  9. Recommended: Enable Automatic paper selection for automatic 4×6" or 6×4" prints (it will automatically cut strip templates into two 2×6" photos) and others.
  10. Add margins if desired.
  11. Optional Internet Connection: You can connect Printpix to the internet (similar to Method 4) so the connected device has internet access. This step is not required for printing, but it is necessary when using AI Photo features.
  12. Warning: This is the least stable method. Most devices automatically disconnect from networks without internet access and switch to mobile data or another WiFi. This frequently interrupts the connection. Use only if no other option is available and monitor the connection constantly.
  13. Start your photo sessions.

Event Configuration on Touchpix.com

  1. Log in to Touchpix.com and go to your events page.
  2. Click the gear icon under Manage → Manage event → Edit event.
  3. In the Printing section, select Auto printing and enable the Print button.
  4. In the Sharing section, enable In-app gallery sharing.

Additional Tips

  • Extra copies: Tap the printer icon on the sharing screen or go to the gallery later to reprint.
  • Sharing Box: Requires Printpix firmware version 1.17 or higher.
  • Printpix works exclusively with the Touchpix app.

Compatibility

Supports HITI, DNP, Sinfonia, Citizen, Mitsubishi, FujiFilm, Sony, and Shinko printers.